These parts should be installed after Stage 110. This will help avoid finger prints and smudges in the gloss finish of the paint. These are cured for 8 hours in a dehydrator at 110F, but they can still warp before being applied. Store these guys in a safe area until then.

Occasionally, thin and long resin-printed parts may warp during shipping due to extreme heat or cold. In most cases, the included 3M adhesive will help straighten out any minor warping. If the part remains misshapen, you can easily fix it by gently heating it with hot water, a hair dryer, or a heat gun. Once the part becomes flexible, reshape it as needed and then cool it quickly—such as with cold water, or cold setting on your hairdryer—to set the new shape. If these methods don’t resolve the issue or you’re not satisfied with the result, please reach out to me for a replacement set.

Yes, this part is show accurate! On the original KITT car, these plexiglass covers would often sag in the California heat, giving KITT his distinctive "smile" seen throughout Seasons 1 to 3. In Season 4, these covers were removed to accommodate the smooth bumper used for Super Pursuit Mode.